Ethernet interfaces | ||
10/100BaseTX Ports (RJ45) | Full/half duplex mode Auto MDI/MDI-XAuto negotiation speed | |
100BaseFX Ports | Optional 1*9 Optional FC, SC,ST for 1*9 Optional distance up to 120km | |
Standards | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/FX IEEE 802.3x Full Duplex and flow control IEEE802.3ad Link aggregation for parallel links IEEE 802.1Q VLAN IEEE 802.1p QoS IEEE 802.3az for Energy-Efficient Ethernet | |
Switch Properties | ||
MAC Table Size | 8K | |
Packet Buffer Size | 4Mbits | |
Jumbo Frame Size | 10KB | |
Switch Delay | < 10us | |
Load capability | Store and Forward | |
Relay Interface | ||
Connector | 1 removable 3pin terminal (3.5mm) | |
Port mirror | 0.5A@125VAC; 2A@30VDC | |
Console Interface | ||
Connector | RJ45 | |
Default setting | 115200, data bits-8, parity-non, stop-1bit, flow control-non | |
Wireless Interface | ||
WIFI_5G Antennas | 2, SMA Female Jack | |
WIFI_2.4G Antennas | 2, SMA Female Jack | |
LTE/5G Antennas | LTE: 2, SMA Female Jack 5G: 4, SMA Female Jack | |
UIM/SIM | 1 removable socket | |
Power Parameters | ||
Connector | 1 removable 5pin terminal (5.08mm) | |
Input Voltage | DC (Non POE): 12/24/48VDC redundant dual inputs, 12~57VDC operating voltage range DC (POE): 48VDC redundant dual inputs, 44~57VDC operating voltage range AC: 85-265VAC single input | |
Overvoltage Protection | Supported | |
Overcurrent Protection | Supported | |
Reverse Protection | DC: Supported | |
MAX power consumption | <25W | |
Grounding Terminal | M4 Screw | |
Physical Characteristics | ||
Dimensions | 115x65x146 mm (4.53×2.56×5.75 in) | |
Housing | Metal | |
Installation | DIN-rail mounting | |
IP Rating | IP40 | |
Weight | <1.0kg | |
Environmental Limits | ||
Operating Temperature | DC: -40 ~ 85℃ (-40 ~ 185℉) AC: -40 ~ 75℃ (-40 ~ 167℉) | |
Storage Temperature | -40 ~ 85℃ (-40 ~ 185℉) | |
Ambient Relative Humidity | 5 ~ 95% (non-condensing) | |
Standards and Certifications | ||
Safety | UL 508 | |
EMC | EN 55032/35 | |
EMI | CISPR 22, 32, FCC Part 15B Class A | |
EMS | IEC 61000-4-2 (ESD): Contact: 8kV; Air: 15kV IEC 61000-4-3 (RS): 80MHz ~ 1GHz: 20V/m IEC 61000-4-4 (EFT): Power: 4kV; Signal: 2kV IEC 61000-4-5 (Surge): Power: 4kV; Signal: 2kV IEC 61000-4-6 (CS): 10V | |
Shork | IEC 60068-2-27 | |
Vibration | IEC 60068-2-6 | |
Freefall | IEC 60068-2-32 | |
Warranty | ||
Warranty Period | 3 years |